Dating fender amps tube chart
Dating fender amps tube chart - Free sex cams no regisrtation
After the preceding looks of the early 50's (TV front from 1950 to 51/2; wide panel '52–54), Leo Fender changed the cabinet design again, this time opting for no extra wood on the front of the amp, except for the narrow top and bottom panels that hold the baffle board to the cabinet.
The exact plight of the Twin-Amp during the months between January and May 1960 however, remains open to considerable speculation, debate and study.
The entire line of Fender amplifiers from 1955 to 1959 (later for smaller models and Bassman) was uniform in this look—tweed or "airline linen" covering with a maroon with gold stripe woven saran grill cloth.
The 1×12 Deluxe-Amp, the 1×15 Pro-Amp and the 3×10 Bandmaster are exceptional in dynamics and tone.
was made can be determined through a variety of sources.
Cabinet Sticker By far the most reliable way to date your amp is to look for the month/date code stamped on the tube layout sticker on the inside of the cabinet.
The controls have black-skirted knobs numbered from 1 to 10.
The Normal channel has two inputs, a "bright" switch (which compensates for loss of brightness through the volume control when the control is set lower than about "6" on its 1-10 scale), a volume control, treble, middle and bass tone controls.However it’s unlikely that the transformer found its way immediately into production, so it’s a pretty sure bet that the a 1975.It could be that another transformer reads 606602 which would make that component a 1976 make, thus the earliest the amp could be is a 1976.These are usually in the form of a six-digit number with the following formatting scheme: The first three digits represent the manufacturer code, the next digit represents the year of production and the last two digits represent the week of production.Thus as an example 606452 is a transformer code: 606 tells us it is a Schumacher transformer made in either 1964 or 1974 and and it was built on the last week of December.Fender Twin Reverb amplifiers use four output tubes, of the 6L6GC type.